Andy Burgin on 19 November 2007:

Please Nokiablog can you help me as i want to upgrade my N95-3 would these codes work on the N95-3 as the backs are identical,i will give it try a see if it works

Helge Ringberg on 19 November 2007:

Awsome stuff, this is exactly what I was looking for. One question though. What happens if I change the product code to SCANDINAVIAN but there is no scandinavian firmware released?
I dont know if the scandinavian firmware is released or not, its just the phone isn’t released in scandinavia.

velimir on 20 November 2007:

@Mark
I have N95 8gb from Nokia Croatia (BALKANS) and product code is 0557650… not sure why you have different one.

phanthomas on 20 November 2007:

..you should not forget to mention that you WILL lose your product warranty doing this! So: Use it at your own risk only. You should really, REALLY know what you are going to do!

Just a sidenote on this tutorial..

Minazih on 20 November 2007:

hey i wanna ask if this procedure will work on n95
i tried now but it doesnt work…
i used the euro1 product code…
when i use the software updater ,when identify the connected phone it shows the old n95 not the n95 8gb.

Andreas Blixt on 21 November 2007:

“I dont know if the scandinavian firmware is released or not, its just the phone isn’t released in scandinavia.”

I live in Sweden and I’ve had my phone since last week (from the operator 3, http://www.tre.se)

Anyways… There aren’t any firmwares out yet (at all) for it so you’re stuck with your operator bundle until one is released. Right now the N95 8GB firmware seems to be v10.0.021, dated 29-09-07.

Taz: There aren’t country-specific codes, but EURO1 is probably what would be used for a phone sold in the UK.

TheFlyer on 22 November 2007:

Hello!

First of all, thank you for great information Mark Guim regarding flashing of the N95 8GB!

Although, I do have one question for you. I’m planning to buy a Nokia N95 8GB in February when I’m going to the States on vacation. But, at the time I will buy the phone, many firmwares might have been released and there will be a long time until a new update will show up. Maybe in June?

So, if I buy the phone with the newest firmware in February and I change the product code to Scandiavian - what will happen? Will it say “no new updates” since the newest American firmware is inside the phone, or will it download the newest Scandinavian firmware right away since the product code has been changes and NSU can’t find any Scandinavian firmware in the phone?

Thanks a lot for any help here!

Jimmy on 23 November 2007:

Me too ………I want to know HONG KONG product code ….please!!!

Snorre Liljegren on 28 November 2007:

I tried this for scandinavia, and it found an update and i updated it, but i couldnt choose any danish languages, only some weird ones, why??

Paul on 28 November 2007:

I would like to know what supports english/chinese also, what code that is, thanks!

tclandy on 29 November 2007:

#0555181: MALAYSIA

Languages support: English, Bahasa Melayu & Simplified Chinese

Shelley Dalton on 7 December 2007:

Do you know if the N95 works with the interwath system? we require cctv in cyprus and have looking at their surveillance system for our holiday home in paphos.

chandru on 11 December 2007:

hi..i’ve got the nokia n95 8gb (n95-2) on the vodafone network here in the uk. the firmware revision says 10.0.021 dated 29/09/2007. is this the latest firmware for the n95 8gb? and is the firmware stated above for the n95-1?

valter norway on 19 December 2007:

i by a n95 8 gb at plemix.com , i live i norway,,no problem to upgrade the fw….us the info at http://thenokiablog……...

stix on 21 December 2007:

Yo!

Uk Voda 8Gb code is 0557135.

If you change it to Euro1 0549487 the update works fine. Updater quoted 11.0.026 (latest version in answer to chandru) for both current AND update (coz I already did it once before learning of NSS) but the procedure goes ahead anyway.

The result was BYEBYE logo hello unbranded!

Regards

steeve on 7 January 2008:

man this Nemesis Service Suite NSS103812 can not use by windows vista more then 32 bit, the highest can go is only windows xp

Hans Petter on 11 January 2008:

Hi. I just wondered. Du you include the “#” symbol with the product code? and a nother question. If something goes wrong. I read on the nokia support center that many who have tried to update the software was cut of during the update. When they did noting wrong. What can you do is so happends?

mambo on 16 January 2008:

hi, anyone know code for taiwan? trying to fresh my australia N95 8GB to read Trad-Chinese, thanks.

Ravn on 21 January 2008:

Can’t get the NSS to whit my N95 8GB??

VirtualRc on 25 January 2008:

Hi
I have a N95 8gb firmware 11 and product code 0558787 for UK. Really want firmware 15. Do you think this will be a long time coming from Nokia updater or should I go through Nemesis product code change to Euro1 and then run updater? Anyone done this on this product code model yet?

Thanks for any advise

dan on 25 January 2008:

how do i install version 15 on my N95 8GB which currently has only verion 10? thankx

junaid on 1 February 2008:

hi, thanks for all the info,

i have the Uk Voda n95 8Gb. the code is 0557135.

am going to change it to Euro1 0549487.

taking into ref the reply to chandru.

i just hope nothing goes wrong with the procegure.

will update this tomorrow.

cheers.
juns

wy6688 on 2 February 2008:

I just changed my N95 8G product code from 0556218 (US) to 0557980 (Hongkong/china),
My firmware already V15.0.0.15 before I changed product code.

When I do a update in PC suite, it said that I already have latest fw though I changed product code.

I know 0557980 (Hongkong/china) also have V15.0.0.15, which include chinese language.

how can I reflash my firmware to the new Hongkong fw?

charles on 10 February 2008:

hi VirtualRc i had the same problem with my nokia n95 8g i had vev 11 and i wanted ver 15 i did with nemmess connect ur mobile usb and start nemesses change ur product to 0534841 then write it in with nemess, mobile write down ur product code before you start if it dont work change the product code bk again and it will upgrade the firmware it worked on my mobile ok mate

Wit on 11 February 2008:

Anyone got the product code for UK O2 N95 8gb? VirtualRc do you have an O2 phone cuz that would make it 0558787???

Jman on 13 February 2008:

Nokia N95 8g
Vodapohne - Vodacom South Africa
Product code 0558167

I changed it to Euro-1 now i have V15 software
not V11
Well done guys

Jman

Mark on 17 February 2008:

Hi,
Anyone have product sode for Japanese ?

mustafa on 19 February 2008:

THANKS SO MUCH…
thank u for share your useful information, I have changed my phone language very easily, thanks again and again

Peter on 25 February 2008:

followed charles rules and i now have firmware v15 on my n95 8gb works like a charm thanks charles

charles on 10 February 2008:

hi VirtualRc i had the same problem with my nokia n95 8g i had vev 11 and i wanted ver 15 i did with nemmess connect ur mobile usb and start nemesses change ur product to 0534841 then write it in with nemess, mobile write down ur product code before you start if it dont work change the product code bk again and it will upgrade the firmware it worked on my mobile ok mate

Chris on 28 February 2008:

Hi,
I bought Nokia N95 8GB from UK (Vodafone).Since i live in canada and tried to use my Canada (Rogers) SIM card in it.Its not working.I tried nemesis serviec suite ,but got stuck when it came to Product Codes as i couldn’t find Canada Product Code.Kindly help me to unlock my phone.

Thanks

junaid on 5 March 2008:

@ kar33m

the old product code is written under the batree on your mobile phone. use the same nss system to change back to the old prod code. mostly Uk Voda 8Gb code is 0557135. (but still check under you batree.)
after changing the prod code and updating the firmware, try using the unlock code from vodafone to unlock ur phone.( and please do tell me how u got the unlock code from them?)
and then to get the firmware v 15 u can always change the prod code to 0534841 after it is unlocked and run the update again.

cheers.
hope i could help.
junaid.

junaid on 12 March 2008:

to neo,
your question is incomplete
please give us a detailed question so we can give u an answer in the thread.
cheers.
junaid.

junaid on 15 March 2008:

hey great news to all you vodafone users
vodafone has started giving unlocked pones since 1st march.
just give them a call and ask for a unlock code and they will give it to you.

note: debrand it only after unlocking the phone else if the product code is changed then theunlock code will not work.

cheers junaid.

junaid on 18 March 2008:

hey avi, just advising you on possible scenarios that might have happened.

u also need the software called “tnt enforcer” to be able to change the prod code in nss.

and if u have it, did u enable it?

if u enabled it, did u click “write” in the nss after u wrote the desired prod code?

if u need the tnt enforcer, mail me on jrmerchant@gmail.com and i will send it right over in a rar file.

ok cheers.

glad i could be of help.

p.s. vodafone cs sucks, i called them up for a nuc code ( to unlock the phone from the network) and the dame says 700+ quid. mailed them on the forum and got an instant reply.
also the nuc codes for all vodafone pay monthly cust is free irrelavent of the age of the handset. the pay as u go cust can obtain the nuc code from vodafone by paaying 19.99(inc. vat)

do try the truphone applicaton, it is great for having an internet phone on ur current phone, and u can have free roaming if u just have an internet connection.
also u can call all gtalk users all over the world and vice-a-versa straight from ur phone.
yes it is free.
no i dont market it.
i am just freeking out wit it. lol
bye for now.

junaid.

Paul on 21 March 2008:

Have any of you experience syncing problems since changing the product code and after updating the firmware.

I used euro code above to update Vodaphone, now debranded which is all fine but PC sync won’t allow install or sync in win XP ??

Should I have formated the hard disk 1st or done a hard reset which means loosing all my apps & info.

But would do it if it fixed the problem.

Are their any specific product codes for the UK N95 8Gb as their seem to be a few, which do you choose & does it matter ?

Thanks
Paul

nil on 23 March 2008:

hello, when i plug n95 8gb usb to computer the drivers are not installing automatically… any suggestion. thanks

costas on 25 March 2008:

Hallo again
Probably I am another victim of the chinese “original” phone because at the top it rights NOKIA N95 8Gb but I only see an MSD with 2GB memory.
Have you any idea?

medo20012 on 3 April 2008:

hi,
thank’s for your support but i want to know some thing about my mobile,i have i-mate sp5 it’s very good but i want the software that allows me to write arabic language on my mobile and allows the mobile also to read the arabic messages.
thank you

KaBoom on 6 April 2008:

Hi all
impressive stuff this, is it possible to go back to your providers FW? 1.2?

My MSN is not working on a debranded 3UK N95 8GB.

I tried to put the Product code back to the original but it didnt work!

Niklas on 9 April 2008:

I have the exact problem Colin, What Ive heard, it has to do with the lates nokia software version. NWe probobly have to wait for an updated version of NSS I guess.

Rxxx on 11 April 2008:

THanks ABS…

Was starting to think I had lost the plot…
I used NSS last nite and upgraded My wife N95 to latest Orange firmware.. (bad idea) but was just wondering if they had unlocked the Voip !

there after I hit the update NSU sw and nothing worked from then onwards…

just wasted 3 hours scatching my head..
until I saw your posting…

Wish I could invoice orange for all the grief they caused us All

Andreas on 13 April 2008:

Hi, last week I bought a N95-2 8GB in the Nokia store in Heathrow terminal 5. It has product code 0558787 and I could upgrade to V20.

Seems very stable, and nice to get the “Rotate screen” function.

chandru on 13 April 2008:

to ashtod. You need the 02 product code which is 0558787 to update to v20.
Anyone know why the 02 product code has newer firmware than the euro1 and vodafone? And also whats latest in it?

ashtod1 on 14 April 2008:

To chandru. Used the O2 product code all went ok and now up to V20. Auto rotate works. Should I change my product code back or leave it as it is.

Thanks

Peter on 15 April 2008:

Changing the Produce Code some how caused the Manufacture Month to change, it changed from 48.something to 53.something. Is this normal and expected behavior? Should I bother correcting it?

ASH on 22 April 2008:

Hi, I just got a North America version Nokia N95 8GB unlocked phone.

I want to watch youtube and other websites that require flash player. I read about Flashlite 3.0, but not sure what step my unlocked phone is currently in and what to do next…

Anyone have any advice on how to get started ?

Aloha, Ash

Insomune on 25 April 2008:

Hey guys, Vancouver [Canada] here! Just bought an N95 8gb Unlocked from NCIX.com and it works great. Just popped my sim card in from [FIDO] Network and works like a charm.

Question tho…!

How do I update my firmware from Version 15. to Version 20 or 21 at that?!

Posted here is a link >> http://www.flickr.com/photos/insomune/2439423783/sizes/o/ << to what happens to my computer when I try to do a firmware update!

Wondering if I need to find a product code for Canada?

Any suggestions?!

Thanks!

Mack

J.C on 25 April 2008:

My device software is V20.0.016 if it affects.

Carlos Ceballos on 27 April 2008:

I tryed to change the product code on my N-95-8G but I have a problem running Nemesis. When I click phone info and then Scan, it shows “Scan for product ..Error!” on the left down corner
Can you help me please?

ashtod1 on 4 May 2008:

Nemesis only works with XP

inn0123 on 4 May 2008:

ahmondjai on 3 May 2008:

I’m having the same problem(Products Dir(’products’)…….Not Found) and scan….busy problem also, does anyone have a solution to this??

no need to scan it again … just key in the product code and press WRITE .

JoeDoe55 on 9 May 2008:

Hi everybody
lots of product codes (thanks!) but… what languages are in each code? In my 0550798 code for Rusian phones I can choose between English, Russian, German, Bulgarian,Hungarian,Romanian and Ucrainian. Same for the writing language (that is, T9 dictonaries). I am perfectly happy with the english menu, but I write mostly in Italian, then English, Spanish and chut chut Russky. So the question is: which product code I have to use with Nemesis to flash the phone? Can live without Russian (what a waste on the keybord!) but can’t live without Italian and English. Thanks and please, as a service to fellow users/consumers, post the languages include in your own product.

dudi on 30 May 2008:

i have the N95 8GB RM-421
And i did everything but couldnt update to the new
frimware , why
?

N95 8GB on 21 June 2008:

This has been the most useful piece of information and I did changed the language of my N95 8GB and it worked within few minutes of the operation which you have described. I am truly obliged to you for making this wonderful post.

Edd on 23 June 2008:

I did this last year with my Orange branded N95. I am currently considering the N95 8GB but I have a problem with the product codes that have been shown.

I currently use the Orange “line 2″ facility. When I went to “Euro1″ with my N95 I lost that facility. I subsequently changed the product codes to a “Carphone Warehouse” product code. This brought back line 2.

Does anyone know whether “Line 2″ (ALS) is supported in the “Euro 1″ product code in the 8GB handset? If not, is there an equivalent “Carphone Warehouse” product code for 8Gig N95?

Insomune on 30 June 2008:

Still no Canadian/American product code? Or should we use a Euro1? And can we get the latest firmware update with it?

Elder on 4 July 2008:

i have the N95 8GB RM-421
in Brazil
??????????????????????